{"title":"Mobile Phase Filters","description":"","products":[{"product_id":"no-met-biocompatible-mobile-phase-filter-economy-slip-on","title":"No-Met Biocompatible Mobile Phase Filter - Economy Slip-On","description":"\u003cp\u003eStainless steel in the flow path is unacceptable in a growing number of applications that involve the separation of biomolecules. High salt buffers can corrode stainless steel, and the metal ions released from metallic filters may contaminate or otherwise react with the biomolecules of interest.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe No-Met polyethylene filter provides a solution for these applications, with inert polymeric fittings for 1\/8\" OD tubing and a 20 µm filter effectively eliminating metal contamination from the fluid path. Use them for IC and biochromatography applications. The Economy version of this product is designed to easily slip over 1\/8\" OD tubing, with no fitting required.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo-Met filters can be used at flow rates up to 500 ml\/min, measured with methanol\/water (1:1), and ultrasonically degassed. Flow rates can vary with solvent and tubing ID.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages of No-Met Biocompatible Mobile Phase Low-pressure Filters:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery competitively priced\u003c\/li\u003e\n\u003cli\u003eInert and biocompatible\u003c\/li\u003e\n\u003cli\u003eAlso recommended for IC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eSpecifications \u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eMaterials:\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.vicijour.com\/pages\/properties-of-polymers\" title=\"Properties of Polymers\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eProperties of Polymers\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv id=\"content\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003ePolyethylene\/PTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter\u003c\/td\u003e\n\u003ctd\u003ePEEK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePEEK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFerrule\u003c\/td\u003e\n\u003ctd\u003eETFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eConnect the filter with 1\/8\" OD\/ 1.59 mm OD PFA or PTFE tubing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECH TIPS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause they are hydrophobic, No-Met filters may initially require some priming with methanol or acetonitrile.\u003c\/p\u003e","brand":"VICI Jour","offers":[{"title":"Economy slip-on connection \/ Polyethylene \/ 20 µm\/ 300 ml\/min","offer_id":40225770995800,"sku":"JR-32174","price":4.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/0647\/products\/JR-32174_1.png?v=1682051234"},{"product_id":"economy-last-drop-mobile-phase-filters-low-pressure","title":"Low Pressure PTFE Economy Last Drop Mobile Phase Filters","description":"\u003cp\u003eA very competitively priced version of our unique Last Drop filter with a flat filter element that sits parallel to the bottom of the reservoir. This design ensures all but the last 2% of the mobile phase is filtered without drawing air into the system.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe filter body comes in two body diameters to fit various bottleneck dimensions. The filter body is made from PTFE, which is resistant to virtually all common mobile phases. Frits are PTFE or stainless.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAdvantages of Economy Last Drop Mobile Phase Low-pressure Filters\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLower price\u003c\/li\u003e\n\u003cli\u003eBiocompatible PTFE frits or stainless steel frits\u003c\/li\u003e\n\u003cli\u003eThree porosity options\u003c\/li\u003e\n\u003cli\u003eTwo diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe recommend you connect the filter with 1\/8\" OD\/ 3.18 mm OD PFA or PTFE tubing.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eMaterials\u003c\/h3\u003e\n\u003cp\u003e\u003ca title=\"Properties of Polymers\" href=\"https:\/\/www.vicijour.com\/pages\/properties-of-polymers\" target=\"_blank\"\u003eProperties of Polymers\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.vicijour.com\/pages\/properties-of-metals\" title=\"Properties of Metals\"\u003eProperties of Metals\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor 1\/8\" OD tubing\u003c\/p\u003e\n\u003cdiv id=\"content\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eBody\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePTFE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFrits\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePTFE\/Type 316 stainless\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECH TIP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasy to replace - easy to clean with ultrasound or quick replacement with a new filter.\u003c\/p\u003e","brand":"VICI Jour","offers":[{"title":"Stainless Steel \/ 19 mm \/ 10 µm\/ 30 ml\/min","offer_id":40225771421784,"sku":"JR-4676-10","price":19.4,"currency_code":"USD","in_stock":true},{"title":"PTFE \/ 19 mm \/ 10 µm\/ 3.5 ml\/min","offer_id":40225771454552,"sku":"JR-4676-10TF","price":18.4,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel \/ 19 mm \/ 2 µm\/ 30 ml\/min","offer_id":40225771487320,"sku":"JR-4676-2","price":19.4,"currency_code":"USD","in_stock":true},{"title":"PTFE \/ 19 mm \/ 2.5 µm\/ 1.2 ml\/min","offer_id":40225771520088,"sku":"JR-4676-2.5TF","price":18.4,"currency_code":"USD","in_stock":true},{"title":"PTFE \/ 19 mm \/ 5 µm\/ 2.6 ml\/min","offer_id":40225771552856,"sku":"JR-4676-5TF","price":18.4,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel \/ 22 mm \/ 10 µm\/ 30 ml\/min","offer_id":40225771585624,"sku":"JR-4677-10","price":24.1,"currency_code":"USD","in_stock":true},{"title":"PTFE \/ 22 mm \/ 10 µm\/ 3.5 ml\/min","offer_id":40225771618392,"sku":"JR-4677-10TF","price":22.9,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel \/ 22 mm \/ 2 µm\/ 30 ml\/min","offer_id":40225771651160,"sku":"JR-4677-2","price":24.1,"currency_code":"USD","in_stock":true},{"title":"PTFE \/ 22 mm \/ 2.5 µm\/ 1.2 ml\/min","offer_id":40225771683928,"sku":"JR-4677-2.5TF","price":22.9,"currency_code":"USD","in_stock":true},{"title":"PTFE \/ 22 mm \/ 5 µm\/ 2.6 ml\/min","offer_id":40225771716696,"sku":"JR-4677-5TF","price":22.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/0647\/products\/JR-4677-TF.jpg?v=1682051282"},{"product_id":"last-drop-mobile-phase-filters-low-pressure","title":"Low Pressure Last Drop Mobile Phase Filters","description":"\u003cp\u003eConventional cylindrical filters can begin to draw air into the system when nearly 10% of the solvent remains in the reservoir. Our unique Last Drop filter with a flat filter element that sits parallel to the bottom of the reservoir. This design ensures all but the last 2% of the mobile phase is filtered without drawing air into the system.\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eLast Drop filters allow more analyses per batch of mobile phase and help reduce hazardous waste. Made from a 316 stainless, PTFE, or hydrophobic PE filter element pressed into an inert PTFE housing. The top of the housing has a 1\/4-28 nut and ferrule or a stepped PEEK fitting connector that slips into 1.5 mm, 2.2 mm, or 3.5 mm ID pump inlet lines.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eRefer also to our \u003ca href=\"https:\/\/www.vicijour.com\/products\/economy-last-drop-mobile-phase-filters-low-pressure\" title=\"Economy Last Drop Mobile Filters\"\u003eEconomy Last Drop Mobile Phase Filters\u003c\/a\u003e in two sizes to fit a variety of bottle neck diameters.\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch3\u003e\u003cb\u003eSpecs\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eMaterials:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.vicijour.com\/pages\/properties-of-metals\" title=\"Properties of Metals\" target=\"_blank\"\u003eProperties of Metals\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.vicijour.com\/pages\/properties-of-polymers\" title=\"Properties of Polymers\" target=\"_blank\"\u003eProperties of Polymers\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv id=\"content\"\u003e\n  \u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003ePTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrits\n\u003c\/td\u003e\n\u003ctd\u003eType 316 SS\n\u003cp\u003ePE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStepped tubing version is for 1.5 mm, 2.2 mm, and 3.5 mm ID tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFitting version (for 1\/8\" OD tubing) includes PEEK 1\/4-28 nut with ETFE ferrule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eTECH TIP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe recommend metal-free PTFE filters for sensitive biochromatography applications where metal surfaces may corrode or interact with samples. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"VICI Jour","offers":[{"title":"Stepped \/ PTFE \/ 2.5 µm\/ 1.2 ml\/min","offer_id":40225774764120,"sku":"JR-9000-0520","price":28.8,"currency_code":"USD","in_stock":true},{"title":"Stepped \/ PTFE \/ 5 µm\/ 2.6 ml\/min","offer_id":40225774796888,"sku":"JR-9000-0521","price":28.8,"currency_code":"USD","in_stock":true},{"title":"Stepped \/ PTFE \/ 10 µm\/ 3.5 ml\/min","offer_id":40225774829656,"sku":"JR-9000-0522","price":28.8,"currency_code":"USD","in_stock":true},{"title":"Stepped \/ Polyethylene \/ 10 µm\/ 11 ml\/min","offer_id":40225774862424,"sku":"JR-9000-0522H","price":28.8,"currency_code":"USD","in_stock":true},{"title":"Stepped \/ Stainless \/ 2 µm\/ 28 ml\/min","offer_id":40225774895192,"sku":"JR-9000-0530","price":32.7,"currency_code":"USD","in_stock":true},{"title":"Stepped \/ Stainless \/ 5 µm\/ 30 ml\/min","offer_id":40225774927960,"sku":"JR-9000-0531","price":32.7,"currency_code":"USD","in_stock":true},{"title":"Stepped \/ Stainless \/ 10 µm\/ 30 ml\/min","offer_id":40225774960728,"sku":"JR-9000-0532","price":32.7,"currency_code":"USD","in_stock":true},{"title":"Fitting \/ PTFE \/ 5 µm\/ 2.6 ml\/min","offer_id":40225774993496,"sku":"JR-9000-0521F","price":28.8,"currency_code":"USD","in_stock":true},{"title":"Fitting \/ PTFE \/ 10 µm\/ 30 ml\/min","offer_id":40225775026264,"sku":"JR-9000-0522F","price":28.8,"currency_code":"USD","in_stock":true},{"title":"Fitting \/ Polyethylene \/ 10 µm\/ 11 ml\/min","offer_id":40225775059032,"sku":"JR-9000-0522HF","price":28.8,"currency_code":"USD","in_stock":true},{"title":"Fitting \/ Stainless \/ 5 µm\/ 30 ml\/min","offer_id":40225775091800,"sku":"JR-9000-0531F","price":32.7,"currency_code":"USD","in_stock":true},{"title":"Fitting \/ Stainless \/ 10 µm\/ 30 ml\/min","offer_id":40225775124568,"sku":"JR-9000-0532F","price":32.7,"currency_code":"USD","in_stock":true},{"title":"Fitting \/ PTFE \/ 2.5 µm\/ 1.2 ml\/min","offer_id":40225775157336,"sku":"JR-9000-0520F","price":28.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/0647\/products\/JR-9000-0530_1_500x500_e40fbd36-f865-4364-a37f-79c62d9fe04e.png?v=1682051343"},{"product_id":"no-met-biocompatible-mobile-phase-filters-low-pressure","title":"No-Met Biocompatible Mobile Phase Filters - Low Pressure","description":"\u003cp\u003eStainless steel in the flow path is unacceptable in a growing number of applications that involve the separation of biomolecules. High salt buffers can corrode stainless steel, and the metal ions released from metallic filters may contaminate or otherwise react with the biomolecules of interest.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe No-Met polyethylene filter provides a solution for these applications, with inert polymeric fittings for 1\/8\" OD tubing and a 20 µm filter effectively eliminating metal contamination from the fluid path. Use them for IC and biochromatography applications. The Economy version of this product is designed to easily slip over 1\/8\" OD tubing, with no fitting required.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo-Met filters can be used at flow rates up to 500 ml\/min, measured with methanol\/water (1:1), and ultrasonically degassed. Flow rates can vary with solvent and tubing ID.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAdvantages of No-Met Biocompatible Mobile Phase Low-pressure Filters:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVery competitively priced\u003c\/li\u003e\n\u003cli\u003eInert and biocompatible\u003c\/li\u003e\n\u003cli\u003eAlso recommended for IC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eSpecs\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003eMaterials: See \u003ca title=\"Properties of Polymers\" href=\"https:\/\/www.vicijour.com\/pages\/properties-of-polymers\" target=\"_blank\"\u003eProperties of Polymers\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv id=\"content\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody\u003c\/td\u003e\n\u003ctd\u003ePolyethylene\/PTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdapter\u003c\/td\u003e\n\u003ctd\u003ePEEK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting\u003c\/td\u003e\n\u003ctd\u003ePEEK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFerrule\u003c\/td\u003e\n\u003ctd\u003eETFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor use with 1\/8\" OD tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECH TIPS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBecause they are hydrophobic, No-Met filters may initially require some priming with methanol or acetonitrile.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLinks:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the filter with our 1\/8\" OD\/ 1.59 mm OD PFA or PTFE tubing.\u003c\/p\u003e","brand":"VICI Jour","offers":[{"title":"1\/4-28 nut and ferrule \/\tPTFE \/ 5 µm \/ 2.2 ml\/min","offer_id":40225775353944,"sku":"JR-32171","price":66.4,"currency_code":"USD","in_stock":true},{"title":"1\/4-28 nut and ferrule \/  Polyethylene \/ \u003c20 µm \/ 500 ml\/min","offer_id":40225775386712,"sku":"JR-32178","price":24.2,"currency_code":"USD","in_stock":true},{"title":"Economy slip-on\nconnection \/   Polyethylene \/ 20 µm \/ 300 ml\/min","offer_id":40225775419480,"sku":"JR-32174","price":4.1,"currency_code":"USD","in_stock":true},{"title":"Economy slip-on\nconnection \/    Polyethylene \/ 45 µm\n(for prep LC) \/ 300 ml\/min","offer_id":40225775452248,"sku":"JR-32174-45","price":4.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0679\/0647\/products\/JR-32171_500.png?v=1682051387"}],"url":"https:\/\/www.viciprecisionsampling.com\/collections\/mobile-phase-filters.oembed","provider":"VICI Precision Sampling","version":"1.0","type":"link"}